SEARCH NOW FOR ALL YOUR HARVEY TOOL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
HARVEY TOOL
873808
SQUARE END MILL: 1/8'' DIA, 3/8'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, DOWNCUT FLUTE, 40 ° HELIX, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
76245
SQUARE END MILL: 0.045" DIA, 0.135" LOC, 2 FLUTES, SOLID CARBIDE 1-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, SINGLE END, BRIGHT/UNCOATED (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
52662-C3
CORNER RADIUS END MILL: 0.062" DIA, 3/32" LOC, 0.01" RADIUS, 3 FLUTES, SOLID CARBIDE, (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
945525
SQUARE END MILL: 0.025" DIA, 0.037" LOC, 3 FLUTES, SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, SINGLE END, BRIGHT/UNCOATED (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
981920-C3
CORNER RADIUS END MILL: 1/8" DIA, 1" LOC, 0.50 MM RADIUS, 4 FLUTE, SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 30 DEG HELIX, ALTIN COATED, SINGLE END, CENTERCUTTING, SERIES MINIATURE END MILLS ...
£23.73
Price with VAT:
£28.48
HARVEY TOOL
934847
SQUARE END MILL: 3/64'' DIA, 0.07'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
898747
SQUARE END MILL: 3/64'' DIA, 9/64'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
944560
SQUARE END MILL: 1/16'' DIA, 0.18'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
992593
SQUARE END MILL: 3/32'' DIA, 0.279'' LOC, 1/8'' SHANK DIA, 2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
HARVEY TOOL
842815-C3
ENGRAVING CUTTER: 30 °, 1/8" DIA, POINTED, SOLID CARBIDE
£24.47
Price with VAT:
£29.37
HARVEY TOOL
873308-C6
ENGRAVING CUTTER: 20 °, 1/8" DIA, TIP RADIUS POINT, SOLID CARBIDE
£24.47
Price with VAT:
£29.37
HARVEY TOOL
12593-C3
SQUARE END MILL: 3/32" DIA, 0.585" LOC, 4 FLUTES, SOLID CARBIDE
£24.47
Price with VAT:
£29.37
HARVEY TOOL
12759-C3
SQUARE END MILL: 1.5 MM DIA, 12 MM LOC, 3 FLUTES, SOLID CARBIDE
£24.47
Price with VAT:
£29.37
HARVEY TOOL
34626
SQUARE END MILL: 0.026'' DIA, 0.039'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
HARVEY TOOL
36210-C3
CORNER RADIUS END MILL: 1/4" DIA, 3/4" LOC, 0.01" RADIUS, 4 FLUTES, SOLID CARBIDE 2-1/2" OAL, 1/4" SHANK DIA, 30 ° HELIX, ALTIN COATED, SINGLE END, SERIES MINIATURE END MILLS - CORNER RADIUS ...
£24.47
Price with VAT:
£29.37
HARVEY TOOL
34627
SQUARE END MILL: 0.027'' DIA, 0.041'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
HARVEY TOOL
35490
SQUARE END MILL: 0.09" DIA, 0.135" LOC, 3 FLUTES, SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, SINGLE END, BRIGHT/UNCOATED (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
HARVEY TOOL
36230-C3
CORNER RADIUS END MILL: 1/4" DIA, 3/4" LOC, 0.0300" RADIUS, 4 FLUTE, SOLID CARBIDE 2-1/2" OAL, 1/4" SHANK DIA, 30 DEG HELIX, ALTIN COATED, SINGLE END, CENTERCUTTING, SERIES MINIATURE END MIL ...
£24.47
Price with VAT:
£29.37
HARVEY TOOL
51010-C4
BALL END MILL: 5/32" DIA, 9/32" LOC, 4 FLUTE, SOLID CARBIDE 2" OAL, 3/16" SHANK DIA, 30 DEG HELIX, AMORPHOUS DIAMOND COATED, SINGLE END, SERIES MINIATURE END MILLS - BALL - STUB & STANDARD, ...
£24.47
Price with VAT:
£29.37
HARVEY TOOL
904212
CORNER RADIUS END MILL: 3/16" DIA, 0.113" LOC, 0.0300" RADIUS, 3 FLUTE, SOLID CARBIDE 2" OAL, 3/16" SHANK DIA, 42 DEG HELIX, BRIGHT/UNCOATED, SINGLE END, CENTERCUTTING, SERIES VARIABLE HELIX ...
£24.47
Price with VAT:
£29.37
HARVEY TOOL
846850
SQUARE END MILL: 0.05" DIA, 1.9 MM LOC, 3 FLUTES, SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, SINGLE END, BRIGHT/UNCOATED (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
HARVEY TOOL
874193
SQUARE END MILL: 3/32" DIA, 0.139" LOC, 4 FLUTES, SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, SINGLE END, BRIGHT/UNCOATED (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
HARVEY TOOL
820008-C3
ENGRAVING CUTTER: 90 °, 1/8" DIA, 0.02" TIP DIA, TIPPED OFF POINT, SOLID CARBIDE ALTIN FINISH, 0.053" LOC, 1/8" SHANK, 2" OAL, 1 FLUTE, USE ON FERROUS & NON-FERROUS METALS (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
HARVEY TOOL
30130-C3
ENGRAVING CUTTER: 90 °, 1/4" DIA, POINTED, SOLID CARBIDE
£25.96
Price with VAT:
£31.15
HARVEY TOOL
900562-C3
SQUARE END MILL: 1/16'' DIA, 5/16'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, ALTIN FINISH, 38 ° VARIABLE HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY= ...
£25.96
Price with VAT:
£31.15
HARVEY TOOL
943912-C6
CORNER RADIUS END MILL: 3/16" DIA, 9/16" LOC, 0.0300" RADIUS, 4 FLUTE, SOLID CARBIDE 2" OAL, 3/16" SHANK DIA, 34 DEG HELIX, ALTIN COATED, SINGLE END, CENTERCUTTING, SERIES VARIABLE HELIX END ...
£25.96
Price with VAT:
£31.15
HARVEY TOOL
855908
SQUARE END MILL: 1/8" DIA, 1/2" LOC, 1 FLUTE, SOLID CARBIDE 2" OAL, 1/4" SHANK DIA, 22 DEG HELIX, BRIGHT/UNCOATED COATED, SINGLE END (MOQ=1, PKG QTY=1)
£25.96
Price with VAT:
£31.15
HARVEY TOOL
923047
SQUARE END MILL: 3/64'' DIA, 1/4'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 42 ° VARIABLE HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£25.96
Price with VAT:
£31.15
HARVEY TOOL
992608
SQUARE END MILL: 1/8'' DIA, 3/8'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£25.96
Price with VAT:
£31.15
HARVEY TOOL
918630
60° 1/4" DIAM 2-1/2" OAL POINTED ENGRAVING CUTTERS UNCOATED, 2 FLUTES, SOLID CARBIDE
£26.70
Price with VAT:
£32.04
HARVEY TOOL
938408-C3
ENGRAVING CUTTER: 30 °, 1/8" DIA, POINTED, SOLID CARBIDE
£26.70
Price with VAT:
£32.04
HARVEY TOOL
23616
ENGRAVING CUTTER: 90 °, 1/4" DIA, POINTED, SOLID CARBIDE
£26.70
Price with VAT:
£32.04
HARVEY TOOL
12825-C3
BALL END MILL: 0.0250" DIA, 19/64" LOC, 3 FLUTE(S), SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 20 DEG HELIX, ALTIN COATED, SINGLE END, SERIES MINIATURE END MILLS - BALL - LONG FLUTE, MINIATUR ...
£26.70
Price with VAT:
£32.04
HARVEY TOOL
12855
BALL END MILL: 0.055" DIA, 0.385" LOC, 3 FLUTE, SOLID CARBIDE 2-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, UNCOATED, SINGLE END (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
HARVEY TOOL
13906
SQUARE END MILL: 0.006" DIA, 0.009" LOC, 2 FLUTES, SOLID CARBIDE
£26.70
Price with VAT:
£32.04
HARVEY TOOL
34622
SQUARE END MILL: 0.022'' DIA, 0.033'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
HARVEY TOOL
66762
SQUARE END MILL: 1/16'' DIA, 5/16'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 5 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 50 ° VARIABLE HELIX, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
HARVEY TOOL
23104
BALL END MILL: 0.0625" DIA, 0.053" LOC, 2 FLUTE, SOLID CARBIDE 1-1/2" OAL, 1/8" SHANK DIA, UNCOATED, SINGLE END (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
HARVEY TOOL
33218
SQUARE END MILL: 0.018'' DIA, 0.027'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
HARVEY TOOL
897940
SQUARE END MILL: 0.04'' DIA, 9/32'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
HARVEY TOOL
944280-C6
BALL END MILL: 0.0800" DIA, 0.1200" LOC, 3 FLUTE, SOLID CARBIDE 1-1/2" OAL, 1/8" SHANK DIA, 34 DEG HELIX, ALTIN NANO COATED, SINGLE END, SERIES VARIABLE HELIX END MILLS FOR HIGH TEMP ALLOYS ...
£26.70
Price with VAT:
£32.04
HARVEY TOOL
11420-C3
SPOTTING DRILL: 90 &DEG POINT, 1-1/2" OAL, SOLID CARBIDE
£27.44
Price with VAT:
£32.93
HARVEY TOOL
33245-C3
SQUARE END MILL: 0.045'' DIA, 0.068'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, ALTIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£27.44
Price with VAT:
£32.93
HARVEY TOOL
53678-C6
CORNER RADIUS END MILL: 0.078" DIA, 0.8750" LOC, 34 DEG HELIX, ALTIN COATED, CORNER RADIUS END, CENTERCUTTING SERIES VARIABLE HELIX END MILLS FOR HIGH TEMP ALLOYS - CORNER RADIUS & MATERIAL ...
£27.44
Price with VAT:
£32.93
HARVEY TOOL
33300-C3
SQUARE END MILL: 0.1'' DIA, 0.15'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, ALTIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£27.44
Price with VAT:
£32.93
HARVEY TOOL
71408
BALL END MILL: 1/8" DIA, 19/64" LOC, 2 FLUTE(S), SOLID CARBIDE 2" OAL, 1/8" SHANK DIA, 20 DEG HELIX, BRIGHT/UNCOATED COATED, SINGLE END, SERIES END MILLS FOR PLASTICS - BALL UPCUT - 2 FLUTE, ...
£27.44
Price with VAT:
£32.93
HARVEY TOOL
46505
DRILL MILL: 1/4" LOC, 2 FLUTES, 90 ° POINT, SOLID CARBIDE 1-1/2" OAL, 1/8" SHANK DIA, UNCOATED (MOQ=1, PKG QTY=1)
£27.44
Price with VAT:
£32.93
HARVEY TOOL
944547-C3
SQUARE END MILL: 3/64'' DIA, 9/64'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, ALTIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£27.44
Price with VAT:
£32.93
HARVEY TOOL
12608-C3
BALL END MILL: 1/8" DIA, 5/8" LOC, 4 FLUTE, SOLID CARBIDE
£28.18
Price with VAT:
£33.82
